H. M. Industries
Odhav, Ahmedabad, Gujarat
GST No. 24AQPPP6855M1ZY
TrustSEAL Verified
Call 0804605807662% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Machine Type | Automatic |
| Condition | New |
| Automation Grade | Automatic |
The Automatic Linear Tunnel type Bottle Washing Machine is suitable for Round as well as Flat Shaped Glass, PET, Plastic Bottles. Machine construction in fully Stainless Steel finish including machine frame structure. All parts coming in contact with Washing Zone and Jets are made from SS 316 Materials.
Machine is suitable for Pharmaceuticals, Foods, Distilleries and many more industries. Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure.
Operation :
Automatic linear Bottle Washing Machine is a compact model used for Wash of oral liquid Bottles. Bottles are feed through S.S. wire mesh conveyor. Bottles are put into pockets in inverted position when Geneva assembly Rotate.
The row of Bottles keeps on moving intermittently due to Geneva motion for individual washes as per the washing cycles arrange. And Bottle wash by Inner side and Outer Side. With force of water and dry with force of Air. Washing Sequence is customised as per Customer Requirement. By Controlling Solenoid Valve Water jets starts only during washing operation and saves costly water. Now, washed containers are again inverted back to upward position and directly put on the Tray to conveyor for Further Process.
Special Feature :
cGMP Model
A Special clutch device is incorporated for Stoppage of Machine in the event, Bottle is over turned or over diameter
Low RPM but High output
All contact parts are made from SS 316 materials
The machine will be provided with SS pumps and SS tanks
Emergency Switch Are Fitted at in Feed and Out Feed Side.
Imported pumps are provided in the machine, which gives a good pressure to wash Bottle properly
Low Water Level in Tanks – Machine Stop
Infeed Drum Jam – Machine Stop
Outfeed Prism Jam – Machine Stop
Outfeed Pusher Jam – Machine Stop
The machine suitable for handling washes of round and flat glass bottle (With help of change parts)
Machine equipped with safety devices to ensure smooth operation with high output.
Technical Specification
Model
HLBW-100/ HLBW-150/ HLBW-200/ HLBW-250
Output/min.
90 to 250 (Depend upon Model)
Number of Pocket
8/12/16/20
Conveyor Height
800 ±50mm as Per Customer Requirement
Power Consumption
Main Motor : 1 hp / 415volts / 50 hz
Heater : 3 KW.
Pump : 0.5 hp / 415 volts / 50 hz
Conveyor : 0.5 hp / 415 volts / 50 hz
Power Requirement
415 volts, 3 Phase, 50 hz
Air Consumption
10 - 30 CFM depend upon the Machine Model.
Water Consumption
100 to 350 LPM depend upon the Model.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Condition | New |
| Packaging Type | Bottles |
| Phase | Three Phase |
| Speed | Depend Upon Model and Nature of Liquid and Neck Size |
| Power Supply | Three Phase |
| Filling Range | 5ml-15L with help of change part |
| Change Parts Required | Syringe |
| Automatic Grade | Automatic |
Description :
Pharmaceutical Liquid Bottle Filling Machine work on volumetric principle with diving nozzles
The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, of S.S Slat Conveyor, Reciprocating Nozzle with self-centering devices & SS Syringe. No container The main drive of the machine and conveyor drive consist of A/C Motor with synchronized variable A/c Frequency drive
Operation:
Containers moving on S.S. Slat conveyor, feed below the filling nozzles through a twin pneumatic operated stopper system
The stopper system and reciprocating nozzles can Synchronize for centering of container below nozzles, to avoid spillage of liquid on container
To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards slowly from bottom level of bottle towards neck during filling. The dosing block with a hexagonal bolt fitted below syringes
Salient Features:
± 1% Filling accuracy on single dose
No bottle No filling system
Elegant and easy control panel for total control on operation
Minimum change overtime, from one size to another container or fill size
Drip tray under the conveyor
Pneumatic bottle stopping arrangement
Synchronized two nos. A/c drive for main motor & conveyor belt
Rigid vibration free construction for trouble free performance
S.S. Elegantly matt finished body
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Automatic |
| Material | SS-304 |
| Condition | New |
Description :
Automatic Screw Capping Machine is versatile, self-supported on stainless steel leg with height adjustment system.
Operation :
The feed container moving on conveyor belt are feed into an in-feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the rotating head pickup a cap from the cap star wheel which is receiving from delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing, rotating head is design to seal container according to pre-set torque.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Condition | New |
| Automation Grade | Automatic |
| Number Of Labelling Dispenser | As per Requirement |
Description :
Automatic Sticker Labeling Machine is one of the most user friendly. The machine is used for full/partial wrap around labeling on different size of round container. It is capable of labeling up to 150 containers per minutes depending on Machine Model, products and label size.
Operation :
The round containers positioned accurate spacing between two containers by the roller Seprator device for wrap-around operation at the labeling point,
The product sensor senses container release a label from self adhesive label roll.
If machine is equipped with batch printing device in that case batch printing device prints the batch no. other matter on label during label is stationary means time between sensing of two label.
The sensed round container moves on conveyor sticker label at labeling point wrapped around to container.
Then the labeled container moves further through a rubber pressing belt stationary rubber pad that ensures neat perfect fixing of label.
Salient Features :
Stainless steel 304 construction.
S.S. Elegantly matt finished body
No change parts requirements.
Very less down time for change over.
Suitable for Glass, Plastic, Pet, Tin, Corrugated containers.
Optional Features :
Acrylic Cabinet (Cover from all Side).
Online printing device.
Online inspection of batch no printing.
Servomotor instead of stepper motor.
PLC with touch screen system.
Additional Information: